© Cesab 5 – 25 T Code(s): 841, 842, 843
Repair manual: Parameters Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
5.5 Factory parameters
The truck's factory parameters are preset in the truck during production at the
factory. Factory parameters can only be changed using the TruckCom
software application.
Note:
Remember that a change of specific truck parameters changes the truck's
properties. Do not change any parameter values without the necessary know-
how. Only authorised service technicians with personal TruckCom user
identities have the rights to change factory settings. The parameters should
only be changed when a specific need for this arises.
The user ID and time of changing parameters will be logged in the logic card
housed in the tiller arm handle.
5.5.1 Overview
Par. Description
1001 Truck type
1002 Non-configurable option
1003-
1042
Optional functions FUNC1 - FUNC8
1044 Master maximum speed
1045 Battery type
1046 Special truck
1101 Built-in charger
1102 Controls for hydraulic function
1110 BDI
1118 Hardware version
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
