Cisco WS-C3560E-24PD-E User Manual

2-143
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
ip dhcp snooping database
ip dhcp snooping database
Use the ip dhcp snooping database global configuration command to configure the DHCP snooping
binding database agent. Use the no form of this command to disable the agent, to reset the timeout value,
or to reset the write-delay value.
ip dhcp snooping database {{flash:/filename | ftp://user:password@host/filename |
http://[[username:password]@]{hostname | host-ip}[/directory]/image-name.tar |
rcp://user@host/filename | tftp://host/filename} | timeout seconds | write-delay seconds}
no ip dhcp snooping database [timeout | write-delay]
This command is available only if your switch is running the IP services image, formerly known as the
enhanced multilayer image (EMI).
Syntax Description
Defaults The URL for the database agent or binding file is not defined.
The timeout value is 300 seconds (5 minutes).
The write-delay value is 300 seconds (5 minutes).
Command Modes Global configuration
Command History
flash:/filename Specify that the database agent or the binding file is in the flash
memory.
ftp://user:password@host/filename Specify that the database agent or the binding file is on an FTP
server.
http://[[username:password]@]
{hostname | host-ip}[/directory]
/image-name.tar
Specify that the database agent or the binding file is on an FTP
server.
rcp://user@host/filename Specify that the database agent or the binding file is on a
Remote Control Protocol (RCP) server.
tftp://host/filename Specify that the database agent or the binding file is on a TFTP
server.
timeout seconds Specify (in seconds) how long to wait for the database transfer
process to finish before stopping.
The default is 300 seconds. The range is 0 to 86400. Use 0 to
define an infinite duration, which means to continue trying the
transfer indefinitely.
write-delay seconds Specify (in seconds) the duration for which the transfer should
be delayed after the binding database changes. The default
is 300 seconds. The range is 15 to 86400.
Release Modification
12.2(20)SE This command was introduced.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English