C-9
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix C Catalyst 3560 Switch Show Platform Commands
show platform ip igmp snooping
show platform ip igmp snooping
Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent
Internet Group Management Protocol (IGMP) snooping information.
show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group
ip-address | hardware | retry [count | local [count] | remote [count]]} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
all Display all IGMP snooping platform IP multicast information.
control [di] Display IGMP snooping control entries. The keyword has this meaning:
• di—(Optional) Display IGMP snooping control destination index
entries.
counters Display IGMP snooping counters.
flood [vlan vlan-id] Display IGMP snooping flood information. The keyword has this meaning:
• vlan vlan-id—(Optional) Display flood information for the specified
VLAN. The range is 1 to 4094.
group ip-address Display the IGMP snooping multicast group information, where ip-address is
the IP address of the group.
hardware Display IGMP snooping information loaded into hardware.
retry [count | local
[count]
Display IGMP snooping retry information. The keywords have these
meanings:
• count—(Optional) Display only the retry count.
• local—(Optional) Display local retry entries.
remote [count] Display remote entries. The keyword has this meaning:
• count—(Optional) Display only the remote count.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
Need help?
General