2-447
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show ipv6 mld snooping mrouter
This is an example of output from the show ipv6 mld snooping mrouter vlan command. It shows
multicast router ports for a specific VLAN.
Switch> show ipv6 mld snooping mrouter vlan 100
Vlan ports
---- -----
2 Gi0/11(dynamic)
Related Commands Command Description
ipv6 mld snooping Enables and configures MLD snooping on the switch or on a
VLAN.
ipv6 mld snooping vlan mrouter
interface interface-id | static
ipv6-multicast-address interface
interface-id]
Configures multicast router ports for a VLAN.
sdm prefer Configures an SDM template to optimize system resources
based on how the switch is being used.