Cisco WS-C3560E-24PD-E User Manual

B-42
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug platform ip igmp snooping
debug platform ip igmp snooping
Use the debug platform ip igmp snooping privileged EXEC command to enable debugging of
platform-dependent Internet Group Management Protocol (IGMP) snooping. Use the no form of this
command to disable debugging.
debug platform ip igmp snooping {all | di | error | event | group | mgmt | pak | retry | rpc | warn}
debug platform ip igmp snooping pak {ip-address | error | ipopt | leave| query | report | rx | svi
| tx}
debug platform ip igmp snooping rpc [cfg | l3mm | misc | vlan]
no debug platform ip igmp snooping {all | di | error | event | group | mgmt | pak | retry | rpc |
warn}
Syntax Description all Display all IGMP snooping debug messages.
di Display IGMP snooping destination index (di) coordination remote procedure
call (RPC) debug messages.
error Display IGMP snooping error messages.
event Display IGMP snooping event debug messages.
group Display IGMP snooping group debug messages.
mgmt Display IGMP snooping management debug messages.
pak {ip-address |
error | ipopt | leave |
query | report | rx |
svi | tx}
Display IGMP snooping packet event debug messages. The keywords have
these meanings:
• ip-address—IP address of the IGMP group.
• error—Display IGMP snooping packet error debug messages.
• ipopt—Display IGMP snooping IP bridging options debug messages.
• leave—Display IGMP snooping leave debug messages.
• query—Display IGMP snooping query debug messages.
• report—Display IGMP snooping report debug messages.
• rx—Display IGMP snooping received packet debug messages.
• svi—Display IGMP snooping switched virtual interface (SVI) packet
debug messages.
• tx—Display IGMP snooping sent packet debug messages.
retry Display IGMP snooping retry debug messages.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English