2-47
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
clear pagp
clear pagp
Use the clear pagp privileged EXEC command to clear Port Aggregation Protocol (PAgP)
channel-group information.
clear pagp {channel-group-number counters | counters}
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all counters by using the clear pagp counters command, or you can clear only the counters
for the specified channel group by using the clear pagp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear pagp counters
This example shows how to clear PAgP traffic counters for group 10:
Switch# clear pagp 10 counters
You can verify that information was deleted by entering the show pagp privileged EXEC command.
Related Commands
channel-group-number (Optional) Channel group number. The range is 1 to 48.
counters Clear traffic counters.
Release Modification
12.1(19)EA1 This command was introduced.
12.2(25)SE The channel-group-number range was changed from 1 to 12 to 1 to 48.
Command Description
show pagp Displays PAgP channel-group information.
To Next Page
Loading...
Need help?
General