2-539
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show vlan filter
show vlan filter
Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands
access-map name (Optional) Display filtering information for the specified VLAN access map.
vlan vlan-id (Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(19)EA1 This command was introduced.
Command Description
show vlan access-map Displays information about a particular VLAN access map or for all
VLAN access maps.
vlan access-map Creates a VLAN map entry for VLAN packet filtering.
vlan filter Applies a VLAN map to one or more VLANs.
To Next Page
Loading...
Need help?
General