Cisco WS-C3560E-24PD-E User Manual

2-338
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
set
set
Use the set policy-map class configuration command to classify IP traffic by setting a Differentiated
Services Code Point (DSCP) or an IP-precedence value in the packet. Use the no form of this command
to remove traffic classification.
set {dscp new-dscp | [ip] precedence new-precedence}
no set {dscp new-dscp | [ip] precedence new-precedence}
Syntax Description
Defaults No traffic classification is defined.
Command Modes Policy-map class configuration
Command History
Usage Guidelines In Cisco IOS Release 12.2(25)SE or later, if you have used the set ip dscp command, the switch changes
this command to set dscp in the switch configuration. If you enter the set ip dscp command, this setting
appears as set dscp in the switch configuration.
In Cisco IOS Release 12.2(25)SEC or later, you can use the set ip precedence or the set precedence
command. This setting appears as set ip precedence in the switch configuration.
The set command is mutually exclusive with the trust policy-map class configuration command within
the same policy map.
For the set dscp new-dscp or the set ip precedence new-precedence command, you can enter a
mnemonic name for a commonly used value. For example, you can enter the set dscp af11 command,
which is the same as entering the set dscp 10 command. You can enter the set ip precedence critical
command, which is the same as entering the set ip precedence 5 command. For a list of supported
mnemonics, enter the set dscp ? or the set ip precedence ? command to see the command-line help
strings.
dscp new-dscp New DSCP value assigned to the classified traffic. The range
is 0 to 63. You also can enter a mnemonic name for a commonly
used value.
[ip] precedence
new-precedence New IP-precedence value assigned to the classified traffic. The
range is 0 to 7. You also can enter a mnemonic name for a
commonly used value.
Release Modification
12.1(19)EA1 This command was introduced.
12.2(25)SE The ip dscp new-dscp keyword was changed to dscp new-dscp.
The set dscp new-dscp command replaces the set ip dscp new-dscp
command.
12.2(25)SEC The ip keyword is optional.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English