2-38
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
clear ip arp inspection log
clear ip arp inspection log
Use the clear ip arp inspection log privileged EXEC command to clear the dynamic Address Resolution
Protocol (ARP) inspection log buffer.
clear ip arp inspection log
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear the contents of the log buffer:
Switch# clear ip arp inspection log
You can verify that the log was cleared by entering the show ip arp inspection log privileged command.
Related Commands
Release Modification
12.2(20)SE This command was introduced.
Command Description
arp access-list Defines an ARP access control list (ACL).
ip arp inspection log-buffer Configures the dynamic ARP inspection logging buffer.
ip arp inspection vlan
logging
Controls the type of packets that are logged per VLAN.
show inventory log Displays the configuration and contents of the dynamic ARP
inspection log buffer.
To Next Page
Loading...
Need help?
General