Cisco WS-C3560E-24PD-E User Manual

2-383
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show dot1x
Switch# show dot1x all
Dot1x Info for interface GigabitEthernet0/1
----------------------------------------------------
Supplicant MAC 00d0.b71b.35de
AuthSM State = CONNECTING
BendSM State = IDLE
PortStatus = UNAUTHORIZED
MaxReq = 2
HostMode = Single
Port Control = Auto
ControlDirection = Both
QuietPeriod = 60 Seconds
Re-authentication = Disabled
ReAuthPeriod = 3600 Seconds
ServerTimeout = 30 Seconds
SuppTimeout = 30 Seconds
TxPeriod = 30 Seconds
Guest-Vlan = 0
This is an example of output from the show dot1x all privileged EXEC command when a restricted
VLAN is configured:
Switch# show dot1x all
Dot1x Info for interface GigabitEthernet2/0/3
----------------------------------------------------
Supplicant MAC 0002.b3eb.0df6
AuthSM State = AUTHENTICATED(AUTH-FAIL-VLAN)
BendSM State = IDLE
Posture = N/A
PortStatus = AUTHORIZED(AUTH-FAIL-VLAN)
MaxReq = 2
MaxAuthReq = 2
HostMode = Single
PortControl = Auto
ControlDirection = Both
QuietPeriod = 10 Seconds
Re-authentication = Disabled
ReAuthPeriod = 3600 Seconds
ServerTimeout = 30 Seconds
SuppTimeout = 30 Seconds
TxPeriod = 10 Seconds
Guest-Vlan = 3
AuthFail-Vlan = 4
AuthFail-Max-Attempts = 3
This is an example of output from the show dot1x interface interface-id privileged EXEC command
when a restricted VLAN is configured:
Switch# show dot1x interface gigabitethernet0/1
Supplicant MAC 0010.a492.db59
AuthSM State = AUTHENTICATED(AUTH-FAIL-VLAN)
BendSM State = IDLE
Posture = N/A
ReAuthPeriod = 3600 Seconds (Locally Configured)
ReAuthAction = Reauthenticate
TimeToNextReauth = 2753
PortStatus = AUTHORIZED(AUTH-FAIL-VLAN)
MaxReq = 2
MaxAuthReq = 2
HostMode = Single
PortControl = Auto
ControlDirection = Both
QuietPeriod = 60 Seconds
Re-authentication = Enabled

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English