B-23
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug matm move update
debug matm move update
Use the debug matm move update privileged EXEC command to enable debugging of MAC
address-table move update message processing.
debug matm move update
no debug matm move update
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines undebug matm move update command is the same as the no debug matm move update command.
Related Commands
Release Modification
12.2(25)SED This command was introduced.
Command Description
mac address-table
move update {receive |
transmit}
Configures MAC address-table move update feature on the switch.
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
show mac
address-table move
update
Displays the MAC address-table move update information on the switch.
To Next Page
Loading...
Need help?
General