2-270
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
mls qos srr-queue output dscp-map
mls qos srr-queue output dscp-map
Use the mls qos srr-queue output dscp-map global configuration command to map Differentiated
Services Code Point (DSCP) values to an egress or to map DSCP values to a queue and to a threshold
ID. Use the no form of this command to return to the default setting.
mls qos srr-queue output dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-id
dscp1...dscp8}
no mls qos srr-queue output dscp-map
Syntax Description
Defaults Table 2-13 shows the default DSCP output queue threshold map:
Command Modes Global configuration
Command History
queue queue-id Specify a queue number.
For queue-id, the range is 1 to 4.
dscp1...dscp8 Map DSCP values to an egress queue.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
threshold threshold-id
dscp1...dscp8
Map DSCP values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For dscp1...dscp8, enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Table 2-13 Default DSCP Output Queue Threshold Map
DSCP Value Queue ID–Threshold ID
0–15 2–1
16–31 3–1
32–39 4–1
40–47 1–1
48–63 4–1
Release Modification
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
Need help?
General