1-6
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 1 Using the Command-Line Interface
Commands Changed in Cisco IOS 12.2(20)SE
Commands Changed in Cisco IOS 12.2(20)SE
Table 1-2 lists describes the commands that have the same function but different syntax than they did in
software releases before Cisco IOS Release 12.2(20)SE.
Table 1-2 Commands Changed
Releases earlier than
Cisco IOS
Release 12.2(20)SE
Cisco IOS
Release 12.2(20)SE or
later Description
show ip igmp snooping
multicast
show ip igmp snooping
groups
Displays the IGMP
1
snooping multicast table for
the switch or multicast information.
1. IGMP = Internet Group Management Protocol
debug autoqos debug auto qos Enables debugging of the auto-QoS
2
feature.
2. auto-QoS = automatic quality of service