B-14
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug ip verify source packet
debug ip verify source packet
Use the debug ip verify source packet privileged EXEC command to enable debugging of IP source
guard. Use the no form of this command to disable debugging.
debug ip verify source packet
no debug ip verify source packet
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug ip verify source packet command is the same as the no debug ip verify source packet
command.
Related Commands
Release Modification
12.2(20)SE This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are
enabled. For syntax information, select Cisco IOS Release 12.2
Configuration Guides and Command References > Cisco IOS
Configuration Fundamentals Configuration Guide, Release
12.2 > System Management > Troubleshooting and Fault
Management.
To Next Page
Loading...
Need help?
General