B-33
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug platform device-manager
debug platform device-manager
Use the debug platform device-manager privileged EXEC command to enable debugging of the
platform-dependent device manager. Use the no form of this command to disable debugging.
debug platform device-manager {all | device-info | poll | port-download | trace}
no debug platform device-manager {all | device-info | poll | port-download | trace}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform device-manager command is the same as the no debug platform
device-manager command.
Related Commands
all Display all platform device manager debug messages.
device-info Display platform device manager device structure debug messages.
poll Display platform device manager 1-second poll debug messages.
port-download Display platform device manager remote procedure call (RPC) usage debug
messages.
trace Trace platform device manager function entry and exit debug messages.
Release Modification
12.1(19)EA1 This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
To Next Page
Loading...
Need help?
General