2-518
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show setup express
show setup express
Use the show setup express privileged EXEC command to display if Express Setup mode is active on
the switch.
show setup express [ | {begin | exclude | include} expression]
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show setup express command:
Switch# show setup express
express setup mode is active
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(19)EA1 This command was introduced.
Command Description
setup express Enables Express Setup mode.
To Next Page
Loading...
Need help?
General