2-382
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show dot1x
show dot1x
Use the show dot1x privileged EXEC command to display IEEE 802.1x statistics, administrative status,
and operational status for the switch or for the specified port.
show dot1x [all | interface interface-id | statistics interface interface-id] [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify a port, global parameters and a summary appear. If you specify a port, details for
that port appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output appear.
Examples This is an example of output from the show dot1x and the show dot1x all privileged EXEC commands:
Switch# show dot1x
Sysauthcontrol = Disabled
Supplicant Allowed In Guest Vlan = Disabled
Dot1x Protocol Version = 1
802.1X AAA Server Status = Alive
all (Optional) Display the IEEE 802.1x status for all ports.
interface interface-id (Optional) Display the IEEE 802.1x status for the specified port (including
type, module, and port number).
statistics interface
interface-id
(Optional) Display IEEE 802.1x statistics for the specified port (including
type, module, and port number).
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SED The display was expanded to include auth-fail-vlan in the authorization
state machine state and port status fields.
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
Need help?
General