To Next Page

To Previous Page

B-88

Catalyst 3560 Switch Command Reference

78-16405-05

Appendix B Catalyst 3560 Switch Debug Commands

debug sw-vlan notification

Use the debug sw-vlan notification privileged EXEC command to enable debugging of the activation

and deactivation of Inter-Link Switch (ISL) VLAN IDs. Use the no form of this command to disable

debugging.

debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |

modechange | pruningcfgchange | statechange}

no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |

linkchange | modechange | pruningcfgchange | statechange}

Syntax Description

Defaults Debugging is disabled.

Command Modes Privileged EXEC

Command History

Usage Guidelines The undebug sw-vlan notification command is the same as the no debug sw-vlan notification

command.

accfwdchange Display debug messages for VLAN manager notification of aggregated

access interface spanning-tree forward changes.

allowedvlancfgchange Display debug messages for VLAN manager notification of changes to the

allowed VLAN configuration.

fwdchange Display debug messages for VLAN manager notification of spanning-tree

forwarding changes.

linkchange Display debug messages for VLAN manager notification of interface

link-state changes.

modechange Display debug messages for VLAN manager notification of interface mode

changes.

pruningcfgchange Display debug messages for VLAN manager notification of changes to the

pruning configuration.

statechange Display debug messages for VLAN manager notification of interface state

changes.

Release Modification

12.1(19)EA1 This command was introduced.

Cisco WS-C3560E-24PD-E User Manual

Questions and Answers: