2-42
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
clear l2protocol-tunnel counters
clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
clear l2protocol-tunnel counters [interface-id]
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet0/3
Related Commands
interface-id (Optional) Specify interface (physical interface or port channel) for which
protocol counters are to be cleared.
Release Modification
12.2(25)SE This command was introduced.
Command Description
show l2protocol-tunnel Displays information about ports configured for Layer 2 protocol
tunneling.
To Next Page
Loading...
Need help?
General