Delta Electronics DVP15MC11T User Manual

Chapter 8 Logic Instructions
8_
8.8.10 DegToRad
FB/FC
Explanation
Applicable model
FC
DegToRad is used to convert degrees to radians.
DVP15MC11T
 Parameters
Parameter
name
Meaning
Input/
Output
Description Valid range
In Degrees Input Degrees to convert
Depends on the data type of
the variable that the input
parameter is connected to.
Out Radians Output
Radians converted from
degrees
Depends on the data type of
the variable that the output
parameter is connected to.
Boolean
Bit string Integer
Real
number
Time, date
String
BOOL
BYTE
WORD
DWORD
LWORD
USINT
UINT
UDINT
ULINT
SINT
INT
DINT
LINT
REAL
LREAL
TIME
DATE
TOD
DT
STRING
In
● ● ● ● ● ● ● ● ● ● ● ● ● ●
Out
●
Note:
The symbol ● indicates that the parameter is allowed to connect to the variable or constant of the data type.
 Function Explanation

DegToRad is used to convert the input parameter In to a radian and the result is output to Out. That
is, Out =( In/180)* π.

The units of In and Out are degree (°) and radian respectively.

Users can choose different data types for the input parameter in this instruction. But the data type of
the output parameter is restricted to LREAL. An error will occur during the compiling of the software
if the data type of the output parameter is not LREAL.
 Precautions for Correct Use

The input variables are not allowed to omit. An error will occur during the compiling of the software if
the input variable is omitted. But the output variables are allowed to omit.
 Programming Example

The data types of DegToRad _In and Out1 are INT and LREAL respectively. The value of Out1 is
0.174532925199433 if the value of DegToRad _In is 10 when DegToRad _EN changes to TRUE.
The value of Out1 is -0.174532925199433 as DegToRad _In is -10.
DegToRad
EN ENO
In Ou t
8-75

Delta Electronics DVP15MC11T Specifications

General

Brand	Delta Electronics
Model	DVP15MC11T
Category	Controller
Language	English