DVP15MC11T Operation Manual
3.1.2.4 Data Types and Valid Ranges Supported
The data types and valid ranges of the variables in the software that DVP15MC11T uses are shown in the
following table.
16#0000000000000000 ~ FFFFFFFFFFFFFFFF
0 ~ +18446744073709551615
−2147483648 ~ +2147483647
−9223372036854775808 ~ +9223372036854775807
14 REAL
−3.402823e+38 ~ −1.175495e-38,
0,
+1.175495e-38 ~ +3.402823e+38
0.0
15 LREAL
−1.79769313486231e+308 ~
−2.22507385850721e-308,
0,
+2.22507385850721e−308 ~
+1.79769313486231e+308,
0.0
16 TIME
T#XXXXXXdXXhXXmXXsXXXms,Unit: ns.
Range:T#0ns~213503d23h34m33s709.551ms
T#0ms
17 DATE
D#Y-M-D. Range: D#1970-01-01~D#2106-02-07. Unit:
s.
D#1970-01-01
18 TOD
TOD#H:M:S:MS, Range:TOD#00:00:00~23:59:59.999.
Unit: ms. If 0 is written, TOD#00:00:00
written, TOD#00:00:00.001 is displayed. If 86399999 is
written, TOD#23:59:59.999 is displayed. If 86400000 is
written, TOD#00:00:00 is displayed. If 4294967295 is
written, TOD#17:2:47.295 is displayed.
TOD#00:00:00
19 DT
DT#Y-M-D-H-M-S. Range:
DT#1970-01-01-0:0:0~2106-02-07-6:28:15. Unit: s.
DT#1970-01-01-0:0:0
3-6