Delta Electronics DVP15MC11T User Manual

DVP15MC11T Operation Manual
A
A.1 Message Format in ASCII Mode
 Communication data structure
Field name Components Explanation
Start character
STX
Start character “:”, the corresponding ASCII code: 0x3A
Communication
address
ADR 1
Communication address consists of two ASCII codes.
ADR 0
Function code
CMD 1
Function code consists of two ASCII codes.
CMD 0
Data
DATA （0）
Data content consists of 2n ASCII codes, n≤205.
DATA （1）
……….
DATA （n-1）
LRC Check
LRC CHK 1
LRC check consists of two ASCII codes.
LRC CHK 0
End character
END1
End character consists of two ASCII codes.
END1 = CR (0x0D),
END0 = LF (0x0A)
END0
The corresponding relation between hexadecimal character and ASCII code:
Hexadecimal
character
“0” “1” “2” “3” “4” “5” “6” “7”
ASCII code
0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37
Hexadecimal
character
“8” “9” “A” “B” “C” “D” “E” “F”
ASCII code
0x38 0x39 0x41 0x42 0x43 0x44 0x45 0x46
 ADR (Communication address)
The valid range of communication address: 0～254.
Communication address: 0 means the broadcast message is sent to all slaves and the slaves which
have received the message will not make any response. If communication address is not 0, slaves
will respond to master after receiving the message normally. For instance, ASCII codes for the
communication address of 16 are denoted below.
Decimal 16 is equal to hexadecimal 10. (ADR 1, ADR 0) =‘10’, ‘1’=31H, ‘0’ = 30H
 Function code and data
The data format is determined by function codes. For example, to read the two continuous address
data with hexadecimal 0x0000 as the start address in DVP15MC11T. The communication address of
DVP15MC11T is 1, 0x0000 is the Modbus address of %MW0 in DVP15MC11T PLC.
The data explanation is shown as below:
PC→DVP15MC11T
3A 30 31 30 33 30 30 30 30 30 30 30 32 46 41 0D 0A
DVP15MC11T→PC
3A 30 31 30 33 30 34 30 30 30 31 30 30 30 32 46 35 0D 0A
A-2

Delta Electronics DVP15MC11T Specifications

General

Brand	Delta Electronics
Model	DVP15MC11T
Category	Controller
Language	English