Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD)
(Polling Receive)
By dialing to a sender, you can receive faxes from a board stored on sender's fax machine with a subaddress (SEP)
and password (PWD) feature. To use this feature, you need to register the contact with the subaddress (SEP) and
password (PWD) in the contact list in advance.
1. Select Fax on the home screen.
2.
Select
(More).
3. Select Extended Fax.
4. Tap Polling Receive to set this to On.
5. Tap Close, and then tap Close again.
6.
Select Contacts, and then select the contact with the registered subaddress (SEP) and password (PWD) to
match the destination board.
7. Tap
x
.
Related Information
& “Managing Contacts” on page 58
Making Settings for Blocking Junk Faxes
You can block junk faxes.
1.
Select Settings on the home screen.
2. Select General Settings > Fax Settings > Basic Settings > Rejection Fax.
3. Select Rejection Fax and then enable the following options.
❏ Rejection Number List: Rejects faxes that are in the Rejection Number List.
❏ Fax Header Blank: Rejects faxes that have blank header information.
❏ Unregistered Contacts: Rejects faxes that have not been registered in the contact list.
4.
If you are using the Rejection Number List, tap
, select Edit Blocked Number list, and then edit the list.
Related Information
& “Basic Settings” on page 197
Saving and Forwarding Received Faxes (Unconditional Save/
Forward)
You can set to save and forward received faxes from unspecied senders.
User's Guide
Faxing
162
To Next Page
Loading...
Need help?
General
Weight and Dimensions
