Collation Stack:
Prints received documents from the last page (print in descending order) so that the printed
documents are stacked in the correct page order. When the printer is running low on memory, this
feature may not be available.
Print Suspend Time:
Saves documents received during the specied time period in the printer's memory without printing
them. At the time specied to restart printing, the documents are automatically printed. is feature
can be used for noise prevention at night or to prevent condential documents from being disclosed
while you are away. Before using this feature, make sure there is enough free memory. Even before the
restarting time, you can check and print the received documents individually from Job/Status on the
home screen.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings
Select the menu on the control panel as described below.
Settings > General Settings > Fax Settings > Report Settings
Forwarding Report:
Prints a report
aer
forwarding a received document.
Backup Error Report:
Prints a report when a backup error occurs on forwarding the sent fax to Backup Destination. You can
set this in Fax > Fax Settings > Backup.
Fax Log Auto Print:
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a
specied
time. However, if the number of fax jobs
exceeds 30, the log is printed before the specied time.
Attach Fax image to report:
Prints a Transmission Report with an image of the rst page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to t onto the report.
Report Format:
Select a format for fax reports other than Protocol Trace. Select Detail to print with error codes.
Output Method:
Select an output method for fax reports.
Basic Settings
Select the menus on the control panel as described below.
User's Guide
Faxing
197
To Next Page
Loading...
Need help?
General
Weight and Dimensions
