Admin Settings:
❏ Admin Password
Set, change, and clear an administrator password.
❏ Lock Setting
Select whether or not to lock the control panel using the password registered in Admin
Password.
Restore Default Settings:
Reset the settings in the following menus to their defaults.
❏ Network Settings
❏ Copy Settings
❏ Scan Settings
❏ Fax Settings
❏ Clear All Data and Settings
Firmware Update:
You can get rmware information such as your current version and information on available updates.
Update:
Check if the latest version of the rmware has been uploaded to the network server. If an
update is available, you can select whether or not to start updating.
Notication:
Select On to receive a notication if a rmware update is available.
Menu Options for Print Counter
Select the menus on the control panel as described below.
Settings > Print Counter
Displays the total number of prints, B&W prints, and color prints from the time you purchased the printer.
Menu Options for Supply Status
Select the menu on the control panel as described below.
Settings > Supply Status
Displays the approximate level of the ink and service life of the maintenance box.
When the ! mark is displayed, ink is running low or the maintenance box is nearly full. When the X mark is
displayed, you need to replace the item as ink is expended or the maintenance box is full.
User's Guide
Preparing the Printer
68
To Next Page
Loading...
Need help?
General
Weight and Dimensions
