5.2 Common Menus Setting 157
[Sleep Mode Timer]
Note
• Refer to “2.3 Setting/Exiting the Energy Saver Modes” (P. 51) for more information on Sleep Mode Timer.
[Auto Job History]
[Set Jobs View]
System Settings
Sleep Mode Timer
Setting Description
Sleep Mode Timer Sets the time before the printer enters the Sleep mode. Specify the value from
1 to 240 minutes in 1-minute increments. (See *2 on P. 188.)
• [1 Minutes Later] (default)
Refer to
• “Setting Example: Changing the Sleep Mode Timer” (P. 124)
System Settings
Auto Job History
Setting Description
Auto Job History Sets whether or not to automatically print the [Job History Report] on the
completed print jobs.
• [Do not print] (default)
Does not automatically print the [Job History Report].
•[Print]
When memory fills up to its maximum of 50 print jobs, a history of past jobs
that have not been output is automatically output starting with the oldest print
job. Data being printed or queued print data is not recorded in this history.
System Settings
Set Jobs View
Set Jobs View
Active Jobs
Set Jobs View
Completed Jobs
Completed Jobs
Viewing Options
Completed Jobs
Access To:
Completed Jobs
Hide Job Detail
Setting Description
Active Jobs Sets to display information about printing or queued jobs.
• [Show Job Detail] (default)
• [Hide Job Detail]