A.3 Life of Consumables and Regular Replacement Parts 327
A.3 Life of Consumables and Regular
Replacement Parts
Life of Consumables
*
1
: 100k Maintenance Kit: This is repacing kit for Bypass Feed Roller. A kit consisting of the Fuser
Unit and Bypass Feed Roller Unit (Bypass Feed Roller and Bypass Retard Roller).
*
2
: 200k Maintenance Kit: This is repacing kit for Tray Feed Roller. A kit consisting of the Tray Feed
Roller Unit (Nudger roller, Tray Feed Roller, and Tray Retard Roller) and Transfer Roll.
Important
• Reference values are measured based on ISO/IEC19798. Actual replacement cycles depend on printing
conditions, output contents, paper size and type, and environment.
• The life of the fuser unit depends to a large extent on the number of hours the printer is powered and
other factors. Setting a long time before the printer enters the energy saver modes will cause the printer
to be powered for a longer time, and as a result the fuser unit replacement timing may be accelerated.
For details, contact our Customer Support Center.
Support
Fuji Xerox will keep service functional parts for this printer (parts required for the
maintenance of the functions of the printer) for 7 years after the discontinuation of
manufacture.
Consumables
Page Yield*
1
Print cartridge (15K) Approx. 15,000 pages
100K Maintenance Kit 110V
*1
Approx. 100,000 pages
100K Maintenance Kit 220V
*1
Approx. 100,000 pages
200K Maintenance Kit
*2
Approx. 200,000 pages
To Next Page
Loading...
Need help?
General
