7.1 Replacing Consumables 245
Resetting the Counter
After replacing the fuser unit, perform the required control panel operations to reset their
respective counters.
When replacing the fusing unit, be sure to reset the counter on the control panel.
1. On the control panel, press the < > and
<OK> buttons at the same time.
This displays the [Consumables Menu].
2. Press the < > until [Reset Counter]
appears.
3. Press either the < > or <OK> button to
select so [Fuser Assembly] is displayed.
4. Press either the < > or <OK> button to
select.
5. Press the <OK> button.
6. This resets the counter for the fusing unit.
7. Press the <Settings> button to close
themenu.
Consumables Menu
Serial number...
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
Press OK to reset
Fuser Assembly
Resetting Fuser
Assembly...
Reset completed for
Fuser Assembly
To Next Page
Loading...
Need help?
General
