62 3 Printing
3.2 Printing on Envelopes
This section describes how to print on envelopes.
Postcards/envelopes can be printed when using Tray 1-3.
Loading Envelopes
Only printing on the address side of the envelope is supported. Printing on the reverse side
is not supported.
The following envelope sizes can be used with this printer.
Note
• When using custom size envelopes, register the custom size with the printer driver as a user-defined
size. For details, refer to “Registering Custom Size Paper” (P. 67)
• For user-defined sizes, register the size including the flap in the case of envelopes with their flap open.
(In the case of Ncolor envelopes, 20 mm can be included as the flap part.)
Important
• For best print quality, do not use envelopes that:
• are curled or twisted.
• are stuck together or damaged.
• have windows, holes, perforations, cutouts, or embossments.
• use tie strings, metal clamps, or metal folding bars.
• have postage stamps attached.
• have any exposed adhesive when the flaps are closed.
• have deckle edges or creased corners.
• are wrinkled, rough or are glued.
• have adhesive flaps.
1. Load horizontal envelopes with the address
size facing up, the flap closed, and so they
feed from the side with the flap.
Note
• When using envelopes with adhesive flaps, close the
flaps and set the envelopes so that they feed from the
flap side. Setting envelopes with adhesive flaps with
their flaps open will cause printer malfunction.
Load vertical envelopes with the address
side facing up with the flaps to the right.
Note
• Envelopes can be printed even when their flaps point
left. Correctly select the right setting according to the
flap direction with [Portrait/Landscape (For
Envelopes)] > [Image Rotation 180 Degrees] in [Mixed
Sizes ] of the printer driver.
• Envelope (120 x 235mm) • Monarch envelope (98x191mm)
• Envelope (105 x 235mm) • DL envelope (110x220mm)
• C5 envelope (162x229mm) • No.10 Envelope (105x241mm)
To Next Page
Loading...
Need help?
General
