7.4 Changing an IP Address 267
7.4 Changing an IP Address
This section explains how to change the fixed IPv4 address of this printer manually.
Note
• Use CentreWare Internet Services to change the fixed IPv6 address of the printer. Use the IPv6 address
to access CentreWare Internet Services, and change the IPv6 address by selecting [Properties] tab >
[Connectivity] > [Protocols] > [TCP/IP].
Changing an IP Address
1.
Press the <Printer Settings> bu
tton on the
control panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the< > button.
3. Press the < > or <OK> button to select.
[Network / Port] is displayed.
Note
• If you pressed the
<> or <OK> button on the wrong
item, return to the previous screen by pressing the
<> or the <Back> button.
•
T
o start o
ver from the begi
nning, press th
e <Printer
Settings> button.
4. Press the < > button to select.
[LPD] is displayed.
Note
• [Parallel] appears only when the Parallel Port Kit
(optional) is installed.
5. Press the < > button until [TCP/IP
Settings] is displayed.
6. Press the < > or <OK> button to select.
[IP Mode] is displayed.
7. Press the < > button until [IPv4 Settings]
is displayed.
8. Press the < > or <OK> button to select.
[Get IP Address] is displayed.
Settings
LanguageEmulation
Admin Menu
Network / Port
Network/Port
TCP/IP Settings
TCP/IP Settings
IPv4 Settings
IPv4 Settings
Get IP Address
To Next Page
Loading...
Need help?
General
