EasyManuals Logo
Home>Fuji Xerox>Printer>DocuPrint 3105

Fuji Xerox DocuPrint 3105 User Manual

Fuji Xerox DocuPrint 3105
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
1.6 Configuring the Printer Using CentreWare Internet Services 41
Using CentreWare Internet Services
Follow these steps when accessing CentreWare Internet Services.
1. Start your computer and launch a web browser.
2. In the URL field, enter the IP address or URL of the printer, and press the <Enter>
key. The top page of CentreWare Internet Services is displayed.
Note
When specifying a port number, enter a “:” (colon) and then “80” (the factory default port number) after
the address. Verify the printer's port number by printing [Configuration Report].
The port number can be changed under the [Properties] tab > [Connectivity] > [Protocols] > [HTTP]. If
you change the port number, you must enter a “:” (colon) and then the port number after the address.
Displays a screen for entering the user name and password when the Authentication function is set.
Enter the ID and password of the administrator or user registered on the printer. Contact your
administrator for information on your ID and password. User informatin is displayed on the upper right
when CentreWare Internet Services is started up.
After you logged in with the administrator’s passcode or the user ID and password registered in the
printer to configure and confirm settings, make sure to click [Logout] to log out the system in order to
prevent the leakage of information.
When data encryption is enabled, enter “https” instead of “http” before the address when accessing
CentreWare Internet Services.
For information about data encryption features, refer to “7.9 Security Features” (P. 277). and “7.11 Control
Access to Printer Features by Pre-registering Users” (P. 301).
*1
These settings can only be set using CentreWare Internet Services. They cannot be configured on
the control panel. Some security features are not supported on the model available in China.
*2
You can set the administrative ID and password. The default system administrator ID and password
are “11111” and “x-admin”, respectively.
*3
EP Service is not supported on the model available in China.
Example - URL
Example - IP address for IPv4
Example - IP address for IPv6

Table of Contents

Other manuals for Fuji Xerox DocuPrint 3105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint 3105 and is the answer not in the manual?

Fuji Xerox DocuPrint 3105 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint 3105
CategoryPrinter
LanguageEnglish

Related product manuals