Software update
7-6
7.2.3 To verify the software update
1. The software version can be viewed in the DASHBOARD window of the web
interface.
2. After completing the software update procedure, the ACU will perform a POST
(Power On Self Test).
3. When the POST has finished, the green Pass/Fail LED on the front of the ACU must
become steadily green. Verify that the Pass/Fail LED is not red nor flashing orange
once every 2 seconds. Wait until the Pass/Fail LED is green.
4. Verify that the software update has been completed successfully. You find the software
version number in the DASHBOARD window of the web interface.
Figure 7-5: Verifying software update, FV-110
To Next Page
Loading...
General