Removal and replacement of ADU modules
7-9
7.5 Removal and replacement of ADU modules
All replacement of modules must be carried out by FURUNO. The figure below shows
the modules and their position. Some modules are equipped with LEDs for status
information and troubleshooting.
For instructions on how to open and remove the service hatch see To open and remove the
service hatch on page 2-23.
1. GNSS module.
2. VSAT Interface Module (VIM3).
3. Pedestal Control Module (PCM2).
4. Service switch.
Figure 7-7: FV-110: ADU modules and motor stop switch
To Next Page
Loading...
General