7 Care, Maintenance and Tests
185
The Configuration screen reappears with the newly-selected startup screen
selected. When the iVent
TM
201 is restarted, the screen you have chosen appears.
SETTING THE STARTUP WEIGHT
The iVent
TM
201 default patient weight is set to >70kg. You can change the default
weight.
To change the startup default:
1. From the Configuration screen dial the Control Knob to select Default
Start weight, then press the knob.
2. A pop-up window appears and shows a range of choices from 10 to >70,
as well as Last. Select the required weight, and press the knob to
confirm.
The Configuration screen reappears, with the newly-selected weight selected.
When the iVent
TM
201 is restarted, the first screen appears with the weight you
have selected, now selected.
NOTE Note that the weight selection does not take effect until the ventilator is
restarted. If you need to change or restore the currently select weight, use
Restore Defaults un the Main Menu (See page 105).
DEFAULT FIO2 SETTING
Use the Default FiO2 setting option if you need to change the default iVent
TM
201
FiO2setting.
To set the default FiO2:
1. From the Configuration screen dial the Control Knob to select Default
FiO2 Setting, then press.
2. A pop-up window appears which offers a range of choices: 21%, 40%,
60%, and 100%. Make the required selection and press the knob to
confirm.
3. The Configuration screen reappears with the newly-selected startup
screen selected. When the iVent
TM
201 is restarted, the default O2 setting
is displayed.
To Next Page
Loading...
Need help?
General
