62
Return to the Main screen, rotate the Control Knob until the Start option is
selected, then press the Control Knob.
To return the ventilator to Standby mode:
1. Return to the Main screen, turn the Control Knob to select the Mode
Selection option on the top right of the LCD display, and press the Control
Knob.
2. At the bottom of the drop-down menu is Standby. Dial the knob until
Standby is selected and press. Then select the Yes option in the
Confirmation window and press the knob. The ventilator suspends
operation.
NOTE Always return the iVent
TM
201 to Standby mode before powering down
CHANGING VENTILATION MODE
The Mode Selection option is on the top right side of the LCD display (Figure 30):
Figure 30: The Mode Selection Menu Selected
To change the mode, turn the Control Knob to select the Mode Selection option,
then press. The Ventilation Modes menu pop-up window appears (Figure 31)
which offers six options including Standby:
To Next Page
Loading...
Need help?
General
