Probes
Vivid S5/Vivid S6 User Manual 557
R2424458-100 Rev. 2
Disinfecting probes
In order to provide users with options in choosing a germicide,
GE Medical Systems routinely reviews new medical germicides
for compatibility with the materials used in the transducer
housing, cable and lens. Although a necessary step in
protecting patients and employees from disease transmission,
liquid chemical germicides must also be selected to minimize
potential damage to the transducer.
Refer to the Probe Care Card enclosed in the probe case or to
http://www.gehealthcare.com/usen/ultrasound/products/probe_
care.html for the latest list of compatible cleaning solutions and
disinfectants.
Low-level disinfection
• After cleaning, the probe and cable may be wiped with a
tissue sprayed with a recommended disinfectant.
Use additional precautions (e.g. gloves and gown) when
decontaminating an infected probe.
CAUTION
To minimize the risk of infection from blood-borne pathogens,
you must handle the probe and all disposables which have
contacted blood, other potentially infectious materials, mucous
membranes, and non-intact skin in accordance with infection
control procedures. You must wear protective gloves when
handling potentially infectious material. Use a face shield and
gown if there is a risk of splashing or splatter.
To Next Page
Loading...
Need help?
General
