Presets and System setup
Vivid S5/Vivid S6 User Manual 639
R2424458-100 Rev. 2
Creating a user or a referring member
1. Press New
2. Enter the user’s information.
3. Select the type of user/referring member in Member of
Group(s).
Editing an user configuration
1. Select the actual user in the User list.
2. Make the desired changes.
3. Press
CONFIG or any active scanning key to exit the
Configuration management package.
Deleting a user
1. Select the actual user in the User list.
2. Press Delete.
The user is removed from the User list.
Auto logon and auto Screenlock
Auto logon
• Select the desired logon setup from the pull down menu:
• Disabled: no default user is selected when logging on.
• Last user: the last user is selected automatically when
logging on.
• A specific user: select one of the users to be the default
user when logging on.
Auto logoff
• Set the time span (from 10 min) for the system to
automatically get locked when not in use. When the system
is locked, the current user may either log on again or the
system may be restarted by a different user.
CAUTION
To be able to login on the system, the group Operator MUST be
selected.
To Next Page
Loading...
Need help?
General
