Getting started
Vivid S5/Vivid S6 User Manual 65
R2424458-100 Rev. 2
4. Pull the left handle and swivel the keyboard so it will lock in
its central position (see page 93).
5. Disconnect all external cables linking the unit to any
off-board peripheral devices and network. (Note the marks
on each cable to reconnect them later).
6. Place all probes securely in proper probe holders. Ensure
that the probe cables do not protrude from the side of the
unit or interfere with the wheels, or foot area. Hang the
cords on respective hooks provided, ensuring cords are
secure and out of lower portion of the system and do not
extend beyond the sides of system.
7. Ensure that no loose items are left on the unit.
8. If intending to travel over bumpy surface or if more visibility
is required during transportation, fold the LCD screen
forward to a horizontal position (see "Position Adjustment"
on page 92).
9. Unlock the front-wheel’s brakes.
10. Lock the rear wheel brakes (Swivel Brake) for long travel or
free it for short distance traveling where maneuvering is
needed.
Once all cables and cords are wrapped and secure out of
the lower portion of the system, not extending beyond
sides of system, you are ready for transport.
To ensure safety while moving the unit
1. Ensure that the keyboard console is in central-locked
position.
2. Proceed cautiously when crossing door or elevator
thresholds. Grasp the front handle grips and push or pull or
use the rear handle bar for pushing the system. Do not
attempt to move the unit using cables or probe connectors.
CAUTION
Before folding the LCD monitor, please make sure that the gel
bottle is placed with the dispenser tip down into gel holder or
moved sideways in order not touch the monitor's faceplate.
WARNING
Ensure that the hands of the patient are away from the console
when moving the system or keyboard console.
To Next Page
Loading...
Need help?
General
