July 2010 27 – 487
27.3 Power Supply Units
The iTNC 530 is supplied via connector X69 (X169) on the CC,
See “X69: NC power supply and control signals” on page 27 – 481.
Exception: An MC can be connected directly to a UV 106 (B), the CC is not required. This
constellation is intended for machines with analog axes and spindle(s).
The power supply units include:
UV 105, UV 105 B and UV 106, UV 106 B power supply units
UV and UVR power supply units
UE and UR compact inverters
Further information --> See “Power Supply” on page 17 – 251.
For detailed information, refer to the Service Manual "Inverter Systems and Motors".
To Next Page
Loading...
Need help?
General
