July 2010 30 – 579
30.3 Meaning of the Machine Parameters
Machine parameter lists often contain original HEIDENHAIN comments.
Semicolons ";" designate comments.
Entries after semicolons are not evaluated by the NC software.
Your can enter comments, beginnig with a semicolon, yourself in the MP list. You must have
a write permission for this purpose (correct code number).
Text file
READ_MP.A
If the machine manufacturer has removed the original HEIDENHAIN comments in full or in parts:
8 Enter the PLC code number.
8 Open the program manager.
8 Open one of the following text files:
The text files LIES_MP.A and READ_MP.A are a component of an NC software update.
This means that these text files are also updated with an NC software update.
Thus you always have the suitable comments on the MPs of your installed NC software!
Search MP
numbers in
READ_MP.A.
Do not use the keys GOTO and ENT like in an MP list. Otherwise the editor places the cursor on
the line with the indicated number and not on the requested parameter.
You are concerned with a text file and not with an MP list!
Use the soft keys FIND and EXECUTE for navigation to the requested MP numbers.
Path File Meaning
PLC:\JH\ ... LIES_MP.A HEIDENHAIN comments on the MPs in German
READ_MP.A HEIDENHAIN comments on the MPs in English
Hint:
Transfer the READ_MP.A text file to your service laptop. You can easily refer to the meaning
of the parameters, while the original MP list of the manufacturer is open on the control.
LIES_MP.A or READ_MP.A also includes the default values for the parameters. They are not
valid for your machine. Only the values in the original MP list are relevant.
To Next Page
Loading...
Need help?
General
