July 2010 8 – 87
8.4 Log Entries at Program Cancelation
If an NC program is not exited properly but aborted ahead of time due to an error, additional
information is entered in the log:
îš„ Path and name of the aborted NC program
îš„ Line number of the NC program at program abortion
îš„ ACTUAL position at program abortion
îš„ Offset values with reference to the machine datum (preset)
îš„ Set datum shift, if available
îš„ Tool number
îš„ Tool length, tool radius, etc.
Figure: Excerpt from a log at program abortion
To Next Page
Loading...
Need help?
General
