HEIDENHAIN ITNC 530 Service Manual

July 2010 30 – 625
MP7360 Graphics: 3-D view and plan view PLC
RUN
MP7360.0 Background
MP7360.1 Surface
MP7360.2 3-D: Front face
MP7360.3 Text display in the graphics window
MP7360.4 3-D: Lateral face
MP7360.5 Lowest point of blank form
MP7360.6 Highest point of blank form (below surface)
MP7361 Graphics: Projection in three planes PLC
RUN
MP7361.0 Background
MP7361.1 Top view
MP7361.2 Front and side view
MP7361.3 Axis cross and text in the graphic display
MP7361.4 Cursor
MP7362 Additional status display in the graphics window PLC
RUN
340 490-04
MP7362.0 Background of graphic window
MP7362.1 Background of status display
MP7362.2 Status symbols
MP7362.3 Status values
MP7362.4 Color of the unselected tabs in the graphics window
MP7362.5 AFC tab – Background color
MP7362.6 AFC tab – Color of actual override factor
MP7362.7 AFC tab – Color of actual spindle factor
MP7363 Programming graphics PLC
RUN
MP7363.0 Background
MP7363.1 Resolved contour
MP7363.2 Subprograms and frame for zooming
MP7363.3 Alternative solutions
MP7363.4 Unresolved contour
MP7363.5 Rapid traverse movements
MP7364 Color of the help illustrations for cycles PLC
RUN
MP7364.0-6 Colors 1 to 7 of the graphic program used
MP7364.7 Line color (color 8 of the graphic program)
MP7364.8 Color for highlighted graphic elements if defined in the help illustration
MP7364.9 Background
MP7365 Oscilloscope PLC
RUN
340 420-02
MP7365.0 Background
MP7365.1 Grid
MP7365.2 Cursor and text
MP7365.3 Selected channel
MP7365.4-9 Channel 1 to 6
MP Function and input SW version
and
behavior

HEIDENHAIN ITNC 530 Specifications

General

Brand	HEIDENHAIN
Model	ITNC 530
Category	Control Systems
Language	English