Hitachi ZW 180-6 User Manual

OPERATOR'S STATION
1-89
MNEC-01-037
Front/Rear Wiper Switch
Operate wiper switch (1) to move the front and rear
windshield wipers.
IMPORTANT: The washer motor may become
damaged if washer fluid is continuously used for
more than 20 seconds or the washer motor pump
switch is operated with no fluid in the washer tank.
Take care about the switch operation time and the
fluid level in the washer tank.
Do not operate the washer motor for too long
and keep the washer fluid at the correct level. In
freezing weather, use windshield washer solvent
that will not freeze.
:
The front windshield wiper operates at fast
speed.
:
The front windshield wiper operates at slow
speed.
INT :
The front windshield wiper intermittently
operates.
OFF :
The front windshield wiper stops moving and
the wiper blade is returned to the pre-start
position.
:
Washer fluid squirts from the front nozzle and
the front windshield wiper operates.
:
Washer fluid squirts from the rear nozzle and
the rear windshield wiper operates.
: Rear windshield wiper operates.
: Washer fluid squirts from the rear nozzle.
1
MNEC-01-075
MNEC-01-076
MNEC-01-077
Rear Window Wiper Switch
Front Window Wiper Switch
Wiper Switch
Front
Washer
ON
Front Window Wiper Switch Rear Window Wiper Switch
Front wiper
switch position
indicator

Hitachi ZW 180-6 Specifications

General

Brand	Hitachi
Model	ZW 180-6
Category	Front End Loaders
Language	English