1-33
OPERATOR'S STATION
Aftertreatment Device Regeneration
To keep the system working correctly, periodically, the
collected deposit is removed by purging it at a high
temperature. This process is known as "regeneration".
The regeneration is done in three ways; automatic
regeneration (abbreviated as auto-regeneration), manual
regeneration, and service regeneration.
Aftertreatment Device Regeneration Status Display
Aftertreatment device display (1) displays the regeneration
level of the aftertreatment device.
This symbol indicates that the exhaust
temperature is higher than normal during the
aftertreatment device regeneration. It lights while
auto-regeneration or manual regeneration is in
process.)
MPD8-01-100EN
2
1
To Next Page
Loading...
Need help?
General
