S-13
SAFETY
Drive Machine Safely (Work Site)
Before driving the machine, always confirm that the
steering wheel / and forward / reverse lever (switch)
direction corresponds to the direction you wish to drive.
Be sure to detour around any obstructions.
Driving on a slope may cause the machine to slip or
overturn, possibly resulting in serious injury or death.
When driving up or down a slope, keep the bucket facing
the direction of travel, approximately 200 to 300 mm
(approx. 8 to 12 in) (A) above the ground.
If the machine starts to skid or becomes unstable,
immediately lower the bucket to the ground and stop.
Before using the downshift switch (DSS) while driving
down a slope, apply the brake to decrease the machine
speed enough.
Driving across the face of a slope or steering on a slope
may cause the machine to skid or overturn. If the direction
must be changed, move the machine to level ground, then,
change the direction to ensure safe operation.
WRONG
SA-449
SA-450
SA-451
To Next Page
Loading...
Need help?
General
