7-41
MAINTENANCE
Oil temperature
(50 °C to 60 °C)
(122 °F to 140 °F)
Change Transmission Oil and Transmission Oil Filter
--- every 1000 hours (100 hours at first change only)
d
WARNING:
Unexpected movement of the machine may cause a
serious accident. When parking the machine, place
F-N-R lever (1) in neutral and neutral lever lock (3) in
the lock ( ) position. Then, apply parking brake (2)
and stop the engine.
Before changing oil, install articulation lock bar (4)
to securely hold the front and rear chassis to avoid
an accident due to unexpected machine movement.
Avoid accidents due to unexpected movement of the
machine.
IMPORTANT: Do not use transmission oils other than
those listed in the "Transmission Oil".
f
NOTE: Be sure to replace the transmission oil filter when
changing the transmission oil at the same time.
1. Operate the machine until the transmission oil is heated
to the appropriate temperature (50 °C to 60 °C) (122 °F to
140 °F).
2. Park the machine following the same procedures as
described on page 7-8 for preparation of inspection/
maintenance work.
3. Install articulation lock bar (4) to the front and rear of the
frame by following the procedures described on page
7-10.
MNEC-01-036
1 2 3
Transmission Oil
Temperature Gauge
MNEK-07-044
4
MNEK-01-019
To Next Page
Loading...
Need help?
General
