OPERATOR'S STATION
1-115
Cooling Operation
1. AUTO switch (7):
Press AUTO switch (7) to set the air conditioner AUTO
mode. According to signals sent from various sensors,
the air conditioner amplifier automatically selects
the air flow-in vents, air suction ports, and air flow-
in temperature at the vent, and controls the blower
speed.
2. Temperature Control Switch (3):
Adjust the temperature in the cab by using
temperature control switch (3).
3. Other Functions and Operations
Operate Mode switch (3) to manually select the air
vent.
Operate blower switch (7) to manually control the
blower speed.
Operate circulation/fresh air switch (5) to maintain the
air vent in the fresh air mode or circulation mode.
MNEC-01-006
7
3
5
To Next Page
Loading...
Need help?
General
