S-30
SAFETY
Check Key Switch:
If a fire breaks out, failure to stop the engine will escalate
the fire, hampering fire fighting.
Always check key switch function before operating the
machine every day:
1. Start the engine and run it at low idle.
2. Turn the key switch to the OFF position to confirm that
the engine stops.
If any abnormalities are found, be sure to repair them
before operating the machine.
Check Heat Shields:
Damaged or missing heat shields may lead to fires.
Damaged or missing heat shields must be repaired or
replaced before operating the machine.
If hydraulic hoses are broken while the engine cover
is open, splattered oil on the high temperature parts
such as mufflers may cause fire. Always close the engine
cover while operating the machine.
Evacuating in Case of Fire
If a fire breaks out, evacuate the machine in the following
way:
Stop the engine by turning the key switch to the OFF
position if there is time.
Use a fire extinguisher if there is time.
Exit the machine.
If the cab doors do not open, break them with a
hammer to make an escapeway.
If the cab door cannot be opened, break the window glass
with the hammer.
SA-393
SS-1510
To Next Page
Loading...
Need help?
General
