Honeywell Fusion4 MSC-L User Manual

Operation - Dual Bay Loading Application Overview
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 68 Installation & Operation Manual
Honeywell
12. On the Arm Configuration . Arm <number> screen, select Identifi-
cation.
The following screen appears.
13. On the Arm Configuration . Arm <number> . <Identification> screen,
select Arm Location.
The following screen appears.
14. On the Arm Config. Arm <number>. Arm Location screen, select one
of the following:
 Bay 1: If the selected arm is associated to Bay 1
 Bay 2: If the selected arm is associated to Bay 2.
 None: If the selected arm is a swing arm.
NOTE: f any arm is selected as a swing arm, then perform
steps 15 to 17.

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English