Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 107
Select a COM port and the System Config . COM-n screen
appears.
The following sections provide the entities that are available for the
Serial communication.
5.13.1.3.1.1 Setup
On the System Config . COM-n screen, select <Setup>.
The System Config . COM-n . Setup screen appears with the following
entities.
Entity Description Value range
[Communication protocol]
With this entity you can select the
protocol for the communication port.
<FlexConn> (default)
<Modbus RTU>
<Snet>
<Nedap CR/LF>
<SLIP>
<Minicomp Host>
<Terminal Host>
<FMC Smith>
[Baudrate]
With this entity you can select baud
rate for the communication port.
<Baudrate 1200>
<Baudrate 2400>
<Baudrate 4800>
<Baudrate 9600>
(default)
<Baudrate 19200>
<Baudrate 38400>
<Baudrate 57600>
<Baudrate 115200>
<Baudrate 128000>

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English